Octal D-Type Flip-Flop Integrated Circuit Chip Positive Edge-Trigger 3-State 74HC574PW

FEATURES

• 3-state non-inverting outputs for bus oriented applications

• 8-bit positive edge-triggered register

• Common 3-state output enable input

• Independent register and 3-state buffer operation

• Output capability: bus driver

• I_CC category: MSI

GENERAL DESCRIPTION

The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT574 are octal D-type flip-flops featuring separate D-type inputs for each flip-flop and non-inverting 3-state outputs for bus oriented applications. A clock (CP) and an output enable (OE) input are common to all flip-flops.

The 8 flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH CP transition.

When OE is LOW, the contents of the 8 flip-flops are available at the outputs.

When OE is HIGH, the outputs go to the high impedance OFF-state.

Operation of the OE input does not affect the state of the flip-flops.

The “574” is functionally identical to the “564”, but has non-inverting outputs.

The “574” is functionally identical to the “374”, but has a different pinning.

PIN DESCRIPTION

electronics ic chip

integrated circuit components

Octal D-Type Flip-Flop Integrated Circuit Chip Positive Edge-Trigger 3-State 74HC574PW Images